Pavecon Facility in Texas opts for Temper-Crete Urethane Cement
by Cheryl Morgan
- March 20th, 2019 /
- Project Profile
Property managers and developers throughout the U.S. turn to Pavecon for a higher level of competence and craftsmanship. Since 1992, they have earned a reputation as one of the most respected, and respectful, paving companies in the nation.
Recently, Pavecon built a new facility for in-house repairs of their heavy equipment and fleet vehicles. Bobby Miller with Pavecon Building Services reached out to Mark Petrikat with SSI, a distributor of Westcoat material for flooring solutions.
SSI contacted Kevin Ross, the Regional Sales Manager for Westcoat, and scheduled a job walk at the Farmers Branch, TX facility.
Urethane Cement Flooring Solution Presented
After walking the facility and understanding Pavecon’s needs, Kevin recommended our Temper-Crete Urethane Cement system based off the fact that the facility had new concrete and wanted ultimate protection and a system that would withstand the day to day operations.
The Urethane Cement Flooring Preparation
Pavecon self-performed the Temper-Crete install over the approximately 7,800 square feet existing interior concrete surface. The concrete was shot blasted to an approx. CSP 4-5 and vacuumed clean. The Temper-Crete was used to pre-fill all joints, cracks and spalls and the repairs were ground flush. The Temper-Crete was then poured at 1/4″ thickness and allowed to cure overnight. Once cured, the pour was prepped by lightly grinding to open the very dense Temper-Crete surface and vacuumed clean. A seal coat of EC-95 Cape Cod Gray was applied. A final topcoat of EC-95 Cape Cod Gray was rolled on with CA-31 Large Safe Grip for added slip-resistance.
The Finished Results
Before and After imagery
Advantages of our Temper-Crete Urethane Cement System
Westcoat’s Temper-Crete™ Broadcast System is a monolithic, flowable, urethane cement that can be installed with limited downtime. The Temper-Crete™ Broadcast System has an excellent impact, chemical, and heat resistant qualities. The Temper-Crete™ Broadcast System features an integral colored urethane cement base with decorative aggregate broadcast and polyaspartic topcoat. It offers a variety of decorative finish options and is designed for areas with heavy foot and moderate wheel traffic.
• USDA & FDA Compliant
• Thermal Shock Resistant
• Low Odor
• High Compressive Strength
• High Build
• Fast Turnaround
• Heat Resistant
Do you have a Warehouse or Commercial factory that needs to be redone?
To learn more about our Epoxy and Urethane Cement systems and finishes, visit us at Westcoat.com or contact us at (800) 250-4519 to speak to a local representative in your area.